Materials

Tape measure
Barkskin®
Roman’s R-35 wallpaper prep
Pre-mixed wallpaper glue
Paint-roller and tray
Paintbrush
Damp sponge
Plastic smoother
Utility knife
Straight-edge
Chalk line

Prep Work Required

Step 1: Paint ceiling a base-coat color similar in color to the Barkskin® you will be using.

Step 2: Measure the ceiling’s square footage to determine the amount of Barkskin® required to cover entire surface.

Step 3: Use the measuring tape, straight-edge and utility knife to cut the Barkskin® into squares of equal size.

Step 4: Apply wallpaper — cutting for wall or ceiling surface beforehand — and let dry.

 

Process

Step 1: Find center point of ceiling by creating diagonal lines that form an X in the center of the ceiling. This can be done easily by extending the chalk line from corner to corner and snapping the chalk onto the ceiling.

Step 2: Now, place Barkskin® (pattern side down) on a clean work surface. Pour pre-mixed glue into paint-roller tray. Using a paint-roller or brush, apply glue to the back of the Barkskin®. It’s best to use a thin, even coat of glue.

Step 3: Allow glue to set (drying time will vary according to the type of glue used), then wipe off excess glue with a dry brush or sponge.

Step 4: Align four corners of Barkskin® along the four diagonal lines at center of ceiling. Apply Barkskin® to surface, and smooth lightly with hands. Flatten any wrinkles with the plastic smoother.

Step 5: Repeat steps 5-7 above, working outward from central Barkskin® piece in a clockwise direction until surface is completely covered. Use a utility knife to cut off excess paper that goes beyond intended surface.

Step 6: Don’t worry if the ceiling looks imperfect. The slight gaps or overlaps of the Barkskin® will only complement the irregularities of the Barkskin® itself and add to the room’s rustic look overall.